Fix CRITICAL_STRUCTURE_CORRUPTION Error

Make sure to create a restore point just in case something goes wrong.

Fix CRITICAL_STRUCTURE_CORRUPTION Error Method 1: Check System Log in Event Viewer Method 2: Run SFC and CHKDSK Method 3: Run DISM Method 4: Perform a Clean Boot Method 5: Run Driver Verifier Method 6: Run Windows Memory Diagnostic Method 7: Update BIOS Method 8: Update Drivers

Method 1: Check System Log in Event Viewer

Press Windows Key + R then type eventvwr.msc and hit Enter to open Event Viewer.

Now navigate to the following path: Windows Logs > System. Wait for a few seconds for Windows to load the necessary records. Now under System, look for anything suspicious which might have to cause the BSOD CRITICAL_STRUCTURE_CORRUPTION Error. Check if a certain program is a culprit, is so uninstalling that particular program from your system.

Method 2: Run SFC and CHKDSK

  1. Open Command Prompt. The user can perform this step by searching for ‘cmd’ and then press Enter.

  2. Now type the following in the cmd and hit enter:

  3. Wait for the above process to finish and once done restart your PC.

  4. Next, run CHKDSK to Fix File System Errors.

  5. Let the above process complete and again reboot your PC to save changes.

Method 3: Run DISM

  1. Open Command Prompt. The user can perform this step by searching for ‘cmd’ and then press Enter.

  2. Now type the following in the cmd and hit enter after each one:

  3. Let the DISM command run and wait for it to finish.

  4. If the above command doesn’t work, then try on the below:

Note: Replace the C:\RepairSource\Windows with your repair source (Windows Installation or Recovery Disc).

  1. Reboot your PC to save changes and see if you’re able to Fix CRITICAL_STRUCTURE_CORRUPTION Error.

Method 4: Perform a Clean Boot

Sometimes 3rd party software can conflict with Windows and can cause Blue Screen of Death error. To Fix CRITICAL_STRUCTURE_CORRUPTION Error, you need to perform a clean boot in your PC and diagnose the issue step by step.

Method 5: Run Driver Verifier

This method is only useful if you can log into your Windows normally not in the safe mode. Next, make sure to create a System Restore point.

Run Driver Verifier in order Fix CRITICAL_STRUCTURE_CORRUPTION Error. This would eliminate any conflicting driver issues due which this error can occur.

Method 6: Run Windows Memory Diagnostic

  1. Type memory in the Windows search bar and select “Windows Memory Diagnostic.”

  2. In the set of options displayed select “Restart now and check for problems.”

  3. After which Windows will restart to check for possible RAM errors and will hopefully display the possible reasons as for why you get the Blue Screen of Death (BSOD) error message.

  4. Reboot your PC to save changes.

Method 7: Update BIOS

Sometimes updating your system BIOS can fix this error. To update your BIOS go to your motherboard manufacturer website and download the latest BIOS version and install it.

If you have tried everything but still stuck at USB device not recognized problem, see this guide: How to Fix USB Device not recognized by Windows.

Method 8: Update Drivers

Make sure Windows is up to date, and all the device drivers are also updated. If not, then open Device Manager and manually update each & every device drivers. Alternatively, you can download the latest drivers for the device from their manufacturer’s website.

Recommended:

Fix Brightness issues after Windows 10 Creators Update Fix Windows could not start the Print Spooler service on local computer How To Fix Print Spooler Error 0x800706b9 Fix Windows 10 Creator Update fails to install

That’s it you have successfully Fix CRITICAL_STRUCTURE_CORRUPTION Blue Screen of Death error but if you still have any questions regarding this post feel free to ask them in the comment’s section.